| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Local I/O | 14 Channels DC24V DI, 10 Channels Transistor DO | ||||
| Expandable I/O | 4 modules | ||||
| High-speed counter | Monophase counter: 3 points, 100KHz Biphase counter: 2 points, 100KHz |
||||
| Pulse output | 2point 20KHz | ||||
| Pulse catch | 3 points | ||||
| Interrupt input | 3 points | ||||
| Analog potentiometer | 2, value setting range 0-255 | ||||
| User program memory capacity |
28K bytes/120K bytes | ||||
| Retain area | 512 bytes/6K bytes | ||||
| Input data memory | 512 bytes | ||||
| Output data memory | 512 bytes | ||||
| Mid-variables memory | 8K bytes | ||||
| Global memory | 24K bytes | ||||
| Password | Yes | ||||
| Real-time clock | Built-in | ||||
| Timer | No limit (1ms as minimum unit) | ||||
| Counter | No limit (Maximum counting range: 16 bit) | ||||
| Basic instructions | 283 | ||||
| Function blocks | Over 70 | ||||
| Operation speed | 0.65μs (Basic instruction) | ||||
| Power supply | 24V DC | ||||
| Allowed range | 21V DC-27V DC | ||||
| Current consumption (MAX) | 1300mA | ||||
| Output voltage | 24V DC | ||||
| Allowed range | 22.8V DC-25.2V DC | ||||
| Current output | +24VDC (To expansion bus) | 300mA | |||
| +24V DC (To the outside) | 300mA | ||||
| +5V DC (To expansion bus) | 800mA | ||||
| Short circuit protection | 400mA, 24VDC output | ||||
| Input type | Sink/Source | ||||
| Input voltage rated value | 24V DC | ||||
| Allowed range | 0V DC-30V DC | ||||
| Logic 1 signal | 15-30V DC | ||||
| Logic 0 signal | 0-5V DC | ||||
| Input delay time | <0.6ms (Rated input voltage) | ||||
| Isolation mode | Photocoupler isolation | ||||
| Isolation group | 2 groups | ||||
| Maximum Isolation Voltage | 1500VAC | ||||
| Output type | Transistor | ||||
| Output voltage | 24V DC | ||||
| Allowed range | 20.4V DC-28.8V DC | ||||
| Transistor conduction voltage drop | <0.5V (Output logic "1", current 1A) | ||||
| Contact impedance | <0.2Ω | ||||
| Logic "1" single point output maximum current |
1A | ||||
| Logic "0" maximum leaking current | 1mA | ||||
| Common end output current total | <4A | ||||
| Isolation mode | Photocoupler isolation | ||||
| Isolation group | 2 groups | ||||
| Maximum Isolation Voltage | 1500VAC | ||||
| Response time (status "0" to "1" or "1" to "0") |
Common output <1ms High-speed pulse output<10us |
||||
){kind=link}